I have experiancing problems when cutting different shapes. Lines seems to be distorted and not smooth.
Tested it with bouth my lasers 60w and 100w, pattern is the same on same symbols, so i belive mechanical side is not the problem, maybe the problem is in software?
Maybe someone have experianced similar problem and know the solution.
Thanks in advance.
Distortion in cutting
Moderator: baker
Distortion in cutting
- Attachments
-
- sample 2
- 29405283_1725466714187546_1203663942_o.jpg (56.58 KiB) Viewed 2344 times
-
- sample of small digits
- 28946487_1725464010854483_1863198255_o.jpg (70.29 KiB) Viewed 2344 times
Re: Distortion in cutting
Still having this problem.. Anybody can help maybe?
Re: Distortion in cutting
Its a problem of head movement. If you reduce the speed, it will be better.
You have to adjust the acceleration of the axis, in the system settings.
You have to adjust the acceleration of the axis, in the system settings.
Re: Distortion in cutting
I was experimenting with acceleration but no changes, if i reduce the speed to 10mm/sec the line is smooth but it's way too slow.. when machine was new i get great results with 30mm/sec and faster.. i check everything on machine and all seems to be rigid.. Don't know what else too try..
Here are my settings for X and Y axis..
Here are my settings for X and Y axis..
- Attachments
-
- Vendor settings yo.jpg (183.21 KiB) Viewed 1621 times
Re: Distortion in cutting
You have to experiment with the user parameters, not with vendor.
- Attachments
-
- user_param.JPG (49.08 KiB) Viewed 1608 times