Hi,
#1. I do not recall the order of the lenses on the 4 inch head, and I cannot assemble it back. Could you post some pics please?
#2 Unfortunately my 2 inch focal lens broke and the new one will arrive next week. IN the meantine can I use the 4 inch laser head to cut through 3mm MDF and also some paper?
Thank you.
Anda
4 inch laser head - kind of urgent
Moderators: baker, Thunder laser - Tom, Thunder Laser -Nolan
Forum rules
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
Re: 4 inch laser head - kind of urgent
Hi Anda,
Installation of focus lens please refer to below picture: Yes,you can use 4 inch head to cut,the focal distance is 10mm.
Installation of focus lens please refer to below picture: Yes,you can use 4 inch head to cut,the focal distance is 10mm.
- andaluzia1973
- Posts: 22
- Joined: Wed Jul 05, 2017 11:50 am
Re: 4 inch laser head - kind of urgent
Just to conclude.... Can I use the 4" lens on a 2" head and just change the focal distance to 10mm instead of 6mm ? Thank you