keeping thin wood flat.

Discuss laser machine here freely.

Moderator: baker

Post Reply
Posts: 2
Joined: Sat May 05, 2018 2:29 pm

keeping thin wood flat.

Post by alangdance » Mon May 07, 2018 6:36 pm

What is the best way to keep flat thin wood that likes to bow.
I was using a honeycomb table but after reading people feelings regarding honeycomb tables
have move to a slat table with much better results.
My question is how to keep the wood flat on the slats if it starts to bow. On the honeycomb bed I was using magnets but
this will not work on the blacken aluminium slats.

Any suggestion would be most helpful.


Post Reply