Hi I am looking at buying my first machine primarily to engrave aluminum, steel, and stainless. Anyways what do you guys think about this machine? It needs work.
The person who had this machine said this.
An extra laser cutter that we got as part of a larger deal. This unit could use a little clean up, but it is a nice machine. It powers up, but has not been thoroughly tested. It i listed as a 30 Watt model, but it has a 75 Watt co2 unit in it, so it has been upgraded in the past. The controller is old and could probably use an update, but otherwise very nice.
Buying first machine need help.
Moderator: baker
-
- Posts: 2
- Joined: Wed Aug 22, 2018 4:35 pm
Re: Buying first machine need help.
Machine brand is a Laser Pro 36x24 75
- Attachments
-
- 7CC61197-B313-4C47-AD43-3C1800EB8943.jpeg (31.76 KiB) Viewed 7644 times
-
- 7BC39869-D6C1-4C78-9963-D583C628477E.jpeg (39.63 KiB) Viewed 7644 times
Re: Buying first machine need help.
The machine of China Perfect Laser is easy to use and can be used in a wide range of applications. The seller is very passionate, and has introduced the methods to be used and the matters needing attention, etc, they have good after - sales service, I can promise you of a satisfactory purchase for my own experience, choosing the China Perfect Laser, the machine will surprise you, https://www.perfectlaser.net/
-
- Posts: 10
- Joined: Fri Aug 17, 2018 6:23 am
Re: Buying first machine need help.
Hi Man,
If you are looking for the machine for engraving aluminum, steel, and SS.... I think you just need 30W fiber/CO2 only. For the 75W, you could do some cutting work through this machine.
Just want to remind you one thing, if you want to buy a 2nd hand CO2 machine, you need to check the CO2 tank. If there is any leak, you should reconsider this one.
If you want to engrave small parts, I would like to show ours for your reference. If you have any question, you could e-mail me, I will lovly to answer your question.
E-mail: market@central-laser.com
http://www.central-laser.com/en/product-15.html
If you are looking for the machine for engraving aluminum, steel, and SS.... I think you just need 30W fiber/CO2 only. For the 75W, you could do some cutting work through this machine.
Just want to remind you one thing, if you want to buy a 2nd hand CO2 machine, you need to check the CO2 tank. If there is any leak, you should reconsider this one.
If you want to engrave small parts, I would like to show ours for your reference. If you have any question, you could e-mail me, I will lovly to answer your question.
E-mail: market@central-laser.com
http://www.central-laser.com/en/product-15.html
-
- Posts: 1
- Joined: Wed Sep 12, 2018 10:32 am
Re: Buying first machine need help.
Very good post. Lots of information mentioned in this article. Thanks for sharing here.
NopCommerce Development I ERP Cloud
NopCommerce Development I ERP Cloud