Making a grid on your waste board

Discuss laser machine here freely.

Moderator: baker

Post Reply
Steven61171
Posts: 5
Joined: Sat Aug 15, 2020 8:18 pm

Making a grid on your waste board

Post by Steven61171 »

Hi guys I am new to laser engraving I have a ortur master 2 with a 4.5/5w laser it's advertised as 15w but I know its not at the laser it's the power it consumption. The reason I am posting is that I have cut a waste board and my work area for the machine is 400mm x 430mm I want to mark out a grid or graph in 10mm squares graph size so I can place work easier on the board.
I just need to know how I would go about doing this and what software I would need to draw it out.
Software I have
Inkscape
Laser/grbl
Lightburn
Sketchup Pro 2018
Thanks Steve
Post Reply