When using the laser cutting machine, many operators find that the water temperature of the laser cutting machine occasionally rises too fast, and water plays an important role in the fiber laser cutting machine. So, what are the reasons for the rapid rise of the water temperature of the laser cutting machine?
1. When the metal laser cutting machine is running, the ambient temperature is high.
2. The workload of metal laser cutting machine is too large.
3. The metal laser cutting machine works for a long time.
4. The temperature will be too high if the return of the cooling water outlet pipe is abnormal and the water flow circulation is not smooth.
5. The water inlet pipe and outlet pipe of the pump are dirty, the water pipe is blocked, and the water flow is not smooth.
These are the reasons why the water temperature of metal laser cutting machine rises rapidly. In fact, troubleshooting these exceptions is very simple and easy to operate.
We all know that the laser cutting machine needs a lot of water to cool the high temperature in the laser tube to ensure the normal use and service life of the laser tube. However, when the laser cutting machine is used normally, the water temperature in the cooling water tank is easy to be too high. Especially in summer, the laser cutting machine will overheat in just 2 hours. If it is not replaced in time, the power of the laser tube will decrease significantly. Furthermore, cold water installations are particularly important. The cooler of the laser cutting machine must be maintained regularly to ensure that the machine is in good condition. In case of any fault, please remember not to deal with it by yourself, but ask professional technicians for maintenance, and do not disassemble the machine by yourself.
Besides, we should pay attention to the routine maintenance of the chiller. The specific maintenance methods are as follows:
1. Turn the power switch of the chiller to ON, and the chiller will start. Turn to OFF, and the chiller will be turned off.
2. When the chiller is running, it should be placed in a ventilated environment and the ambient temperature should not exceed 40 ℃.
3. Temperature setting, when starting. When the temperature display screen is flashing, it is in the temperature setting mode. Press up and down to set high temperature water and low temperature water respectively for cyclic regulation.
4. Set the low temperature water of the chiller at 20-25 ℃ according to the ambient temperature. The normal temperature water is set at 26-30 ℃ according to the ambient temperature.
5. Ensure the power supply, current and voltage of the chiller are stable, normal and smooth.
6. Regularly replace the circulating cooling water, generally once every three months.
7. Clean the dust accumulated in the condenser and dust screen regularly.
Solution to High Water Temperature of Laser Cutting Machine Chiller
Moderator: baker