Laser cutting Eiffel Tower
Moderator: baker
Forum rules
You need to do is register as a user and go directly to the files you want to Download
You need to do is register as a user and go directly to the files you want to Download
-
- Posts: 84
- Joined: Fri Jun 05, 2015 8:18 am
Laser cutting Eiffel Tower
Travel through time and witness a historic construction in Monument Builders: Eiffel Tower, an amazing Time Management game! Travel through the streets of 19th century Paris and visit the incredible construction site of the famous Eiffel Tower. Improve the surrounding neighborhoods for the world expo, provide parts to the construction site, develop the local economy, and improve the roads so it’s easier to transport materials in Monument Builders: Eiffel Tower!
Video:
https://www.youtube.com/watch?v=uJTq5fE ... za5zvlre4c
Files:
Video:
https://www.youtube.com/watch?v=uJTq5fE ... za5zvlre4c
Files:
You do not have the required permissions to view the files attached to this post.
Re: Laser cutting Eiffel Tower
Hi, Nolan.
This work will be my next project..
I have some questions about it.
How cut you the inner Windows before the external edge?
I can see that all is in black color, and I use a color to I want cut first and other color to external cut.
I'll write again when I see the attached file.
Regards
Antonio
This work will be my next project..
I have some questions about it.
How cut you the inner Windows before the external edge?
I can see that all is in black color, and I use a color to I want cut first and other color to external cut.
I'll write again when I see the attached file.
Regards
Antonio
Desde Jerez de la Frontera, sur de España, mis mejores deseos a todos.
-
- Posts: 84
- Joined: Fri Jun 05, 2015 8:18 am
Re: Laser cutting Eiffel Tower
Hi Hierro,
our controller is RDC6442G, and software is RDWorksV8, if you use same controller and software, the screen should be same.
for example, you need to cut 2 rectangle, cut the small one firstly, right?
please select "cut optimize", tick "inside to outside", then click "ok". please check the picture.
our controller is RDC6442G, and software is RDWorksV8, if you use same controller and software, the screen should be same.
for example, you need to cut 2 rectangle, cut the small one firstly, right?
please select "cut optimize", tick "inside to outside", then click "ok". please check the picture.
You do not have the required permissions to view the files attached to this post.
Re: Laser cutting Eiffel Tower
Thank you, Nolan and Linus.
I´ll try as you tell me.
I´ll try as you tell me.
Desde Jerez de la Frontera, sur de España, mis mejores deseos a todos.
-
- Posts: 84
- Joined: Fri Jun 05, 2015 8:18 am
Re: Laser cutting Eiffel Tower
ok, just ask me again if it doesn't work.
Re: Laser cutting Eiffel Tower
oh!very nice.
-
- Posts: 3
- Joined: Fri Dec 16, 2016 9:59 am
- Contact:
Laser cutting Eiffel Tower
He all,
Any one no anyone or where to get a chassis laser cut.I have cad file of a chassis I designed just want it cut
Any suggestions?
Liam
Any one no anyone or where to get a chassis laser cut.I have cad file of a chassis I designed just want it cut
Any suggestions?
Liam
Re: Laser cutting Eiffel Tower
You can upload you design,I'll have a try.
Because of major,be at ease so.
Re: Laser cutting Eiffel Tower
Thank you, Nolan and Linus.
This is a very nice job.
This is a very nice job.