Hello,
i am facing a new problem:
the chiller's alarm started to go on.
I added water, but since then the alarm is still on, and it's impossible to stop it.
The temperature controller is blinking with all leds on: impossible to read any information...
I tried to restore factory settings but without any success: everything is still blinking and alarm still goes on...
Any idea please?
Thank you for your help...
CHILLER Problem
Moderators: baker, Thunder laser - Tom, Thunder Laser -Nolan
Forum rules
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
-
- Posts: 84
- Joined: Fri Jun 05, 2015 8:18 am
Re: CHILLER Problem
I'm wondering is there any error code show on the display of chiller or the display just died
Re: CHILLER Problem
No error code: all the leds are blinking ;-(
Re: CHILLER Problem
Hi Andy,
OK,please turn off your chiller.
Then use a water pipe directly connected to chiller water outlet and inlet.
Check if the alarm is still on and is there water flowing?
OK,please turn off your chiller.
Then use a water pipe directly connected to chiller water outlet and inlet.
Check if the alarm is still on and is there water flowing?
Re: CHILLER Problem
Please find here a link with the problem: it will be easyer for you to understand
https://www.youtube.com/watch?v=Sq6X5s-evac
https://www.youtube.com/watch?v=Sq6X5s-evac
Re: CHILLER Problem
Hi Andy,
Please note:you should use a water pipe directly connected to chiller water outlet and inlet before turn chiller on.see attachment
From your video,it seems there is no water flowing,did you check the water,is it enough.see attachment.
If water is enough but no water flowing,please open the cover from the chiller,and check if the water pump inside is working well or not?
Please note:you should use a water pipe directly connected to chiller water outlet and inlet before turn chiller on.see attachment
From your video,it seems there is no water flowing,did you check the water,is it enough.see attachment.
If water is enough but no water flowing,please open the cover from the chiller,and check if the water pump inside is working well or not?
- Attachments
-
- water pump.png (284.07 KiB) Viewed 6624 times
-
- check the room temperature from chiller.png (33.7 KiB) Viewed 6624 times
-
- first step.png (79.42 KiB) Viewed 6624 times
Re: CHILLER Problem
OK, thank you for the information...
In the meantime, i was helped by technical service of S&A (where the chiller comes from),
and we could find out that it's a pump problem.
So, they are sending spare part to me and problem should be resolved
Thank you for your help,
best regards,
Andy
In the meantime, i was helped by technical service of S&A (where the chiller comes from),
and we could find out that it's a pump problem.
So, they are sending spare part to me and problem should be resolved
Thank you for your help,
best regards,
Andy
Re: CHILLER Problem
It would be good and no problem
Any problems just keep in touch.
Any problems just keep in touch.