Laser 50W problem

Discuss laser machine here freely.

Moderator: baker

Post Reply
Alastair
Posts: 8
Joined: Sun Mar 25, 2018 8:56 pm

Laser 50W problem

Post by Alastair »

My Laser machine starts at the X axis then moves slowly to the centre of the machine and stops. Each time the machine is started it says System resetting. and goes through the above procedure. Any ideas?
Cherry Stylecnc
Posts: 44
Joined: Mon Sep 04, 2017 7:44 am
Contact:

Re: Laser 50W problem

Post by Cherry Stylecnc »

If your machine like as follows:

https://www.stylecnc.com/non-metal-lase ... -100w.html

How long time you bought it?
Alastair
Posts: 8
Joined: Sun Mar 25, 2018 8:56 pm

Re: Laser 50W problem

Post by Alastair »

Can you reply in English as I do appreciate your help with my problem
Cherry Stylecnc
Posts: 44
Joined: Mon Sep 04, 2017 7:44 am
Contact:

Re: Laser 50W problem

Post by Cherry Stylecnc »

You can take some picture about your problem, or contact me directly, i will check what's the problem about your machine.

sales@stylecnc.com
Skype: style.cnc
Whatsapp:+8618253126778
https://www.stylecnc.com/
justinthomas
Posts: 2
Joined: Thu May 17, 2018 7:11 am

Re: Laser 50W problem

Post by justinthomas »

I am happy when reading your article with updated information! Thanks a lot for sharing a useful article.
kenedy
Posts: 2
Joined: Fri May 25, 2018 12:32 pm

Re: Laser 50W problem

Post by kenedy »

As Cherry said You have to take some picture about your problem then we'll find the solution for it...
http://www.soran.edu.iq
Post Reply