Hi all,
I have a Chinese JQ Laser 9060 running RDWORKS. I make a very simple program of two squares and save it to udsk(flash drive). I get some garbage message when it saves, but the file is saved. I thought these machines ran GCode, but the output the the udsk is a binary file. File extension is .rd
I have the udsk formatted as FAT32. I have tried two different flash drives. I have tried the USB port on the side of the machine and also the USB port directly on the controller. When I tell it to read from the flash drive it says NO FILES.
Any idea what I am missing?
Thanks.
laser controller not reading from flash drive
Moderator: baker
Re: laser controller not reading from flash drive
Given the challenges you're facing with your Chinese JQ Laser 9060 and RDWORKS software, it might be worth considering the Monport laser as an alternative. Monport lasers are known for their user-friendly interface, high-quality performance, and affordability. You can find more information about Monport lasers on their product page at https://monportlaser.com/collections/co ... ka374VZjm3 Switching to a Monport laser could potentially provide you with a smoother experience and reliable operation for your laser cutting needs. Plus, with Monport's reputation for ease of use, you may find it easier to work with compared to your current situation with the JQ Laser.
Re: laser controller not reading from flash drive
It seems like you're encountering some frustrating issues with your JQ Laser 9060 and RDWORKS software. While I can't provide a specific solution to your problem, I can share my positive experience with Monport Laser. A few months ago, I switched to Monport Laser https://bit.ly/48Fxwm7 for my laser cutting needs, and I've been incredibly satisfied with its performance. The software is user-friendly, and the machines are reliable, providing precise cuts every time. Plus, Monport Laser's customer support team is always available to assist with any technical difficulties. If you're looking for a reliable solution, I highly recommend giving Monport Laser a try.fijikim wrote: ↑Mon Jul 02, 2018 9:32 am Hi all,
I have a Chinese JQ Laser 9060 running RDWORKS. I make a very simple program of two squares and save it to udsk(flash drive). I get some garbage message when it saves, but the file is saved. I thought these machines ran GCode, but the output the the udsk is a binary file. File extension is .rd
I have the udsk formatted as FAT32. I have tried two different flash drives. I have tried the USB port on the side of the machine and also the USB port directly on the controller. When I tell it to read from the flash drive it says NO FILES.
Any idea what I am missing?
Thanks.