Why does the fiber laser cutting machine not emit light?

Discuss laser machine here freely.

Moderator: baker

Post Reply
laser cutting
Posts: 37
Joined: Thu Jun 21, 2018 7:49 am

Why does the fiber laser cutting machine not emit light?

Post by laser cutting » Wed Jul 11, 2018 7:03 am

 If the fiber laser cutting machine does not emit light, it will not be able to use the laser to cut the material. The impact on our production and processing is very large. Therefore, it is necessary to check why the fiber laser cutting machine does not emit light, and reduce the fiber laser. The cutting machine has failed, causing our economic loss.
Laser Engraving And Cutting Machine
So, what are the reasons why the fiber laser cutting machine does not emit light?
1. Observe the current indication by observing the current meter of the fiber laser cutting machine. If there is no current indication, the circuit of the fiber laser cutting machine should be inspected;
2, check the water circulation system of the fiber laser cutting machine, you can also find the reason for non-lighting, if the water circulation system is not normal, then the fiber laser cutting machine can not work normally;
CO2 Laser Enrgaver
3. If it is still impossible to determine the reason why the fiber laser cutting machine does not emit light by checking the above two points, the manufacturer should be found in time for maintenance.
When we find that the fiber laser cutting machine does not emit light, we can take the above treatment to ensure that the fiber laser cutting machine can work normally.

Post Reply