Is the Co2 laser engraving machine for glass ?
Moderator: baker
-
- Posts: 81
- Joined: Wed Aug 22, 2018 2:56 am
- Contact:
Is the Co2 laser engraving machine for glass ?
Do you know is the Co2 laser engraving machine can screen on glass?
-
- Posts: 1
- Joined: Fri Aug 02, 2019 9:27 am
Re: Is the Co2 laser engraving machine for glass ?
With co2 laser,there is two results:
1.use laser engraving machine RF laser soure,the engraving result is ok.if you check nearly,you can see small breaks on glass.
2.If you use glass tube under 60w,the engraving is soso.Certainly the glass breaks are obviously.Break spots is little bigger.
If you fiber laser with galvo head,the results is bad.most people can't accept it.
With UV laser,the engraving results are GOOD,although you can see very small breaks,99% people can accept it for wine glass engraving,even for some images.
1.use laser engraving machine RF laser soure,the engraving result is ok.if you check nearly,you can see small breaks on glass.
2.If you use glass tube under 60w,the engraving is soso.Certainly the glass breaks are obviously.Break spots is little bigger.
If you fiber laser with galvo head,the results is bad.most people can't accept it.
With UV laser,the engraving results are GOOD,although you can see very small breaks,99% people can accept it for wine glass engraving,even for some images.
-
- Posts: 81
- Joined: Wed Aug 22, 2018 2:56 am
- Contact:
Re: Is the Co2 laser engraving machine for glass ?
Thanks very much, now i am clear, appreciate for your help