poor cutting results

[Tosho82]

Hello there, I'm Tomislav from Croatia, electrician and am working on plasma cutter and laser cutter.

Now I started to work on chinese CO2 laser with 280w yongli tube and off course didn't get any feedeback from seller.
It's about cutting stainless steel and all that I've cut has terrible, burnt edges so, I'm wondering if here is somenone who works on that kind of machine to tell if this is ok or there's something wrong and to check how to get the best of the machine with cutting everything else.
I mean, on this kind of machine can I get better results or this is the best I can get?

Here are some pictures of the machine and cutting results.

Thanks everyone in advance, regards.

[justin_h]

Hello there, I'm Tomislav from Croatia, electrician and am working on plasma cutter and laser cutter.

Now I started to work on chinese CO2 laser with 280w yongli tube and off course didn't get any feedeback from seller.
It's about cutting stainless steel and all that I've cut has terrible, burnt edges so, I'm wondering if here is somenone who works on that kind of machine to tell if this is ok or there's something wrong and to check how to get the best of the machine with cutting everything else.
I mean, on this kind of machine can I get better results or this is the best I can get?

Here are some pictures of the machine and cutting results.

Thanks everyone in advance, regards.

Hi Tomislav,

For cutting stainless steel with your CO2 laser, achieving clean edges can be challenging. Ensure proper focus, gas selection, and cutting parameters. With your 280W Yongli tube, you have adequate power. Consider trying the Monport laser for its quality and affordability. https://monportlaser.com/?sca_ref=5031521.ka374VZjm

[sandara_p]

Hello there, I'm Tomislav from Croatia, electrician and am working on plasma cutter and laser cutter.

Now I started to work on chinese CO2 laser with 280w yongli tube and off course didn't get any feedeback from seller.
It's about cutting stainless steel and all that I've cut has terrible, burnt edges so, I'm wondering if here is somenone who works on that kind of machine to tell if this is ok or there's something wrong and to check how to get the best of the machine with cutting everything else.
I mean, on this kind of machine can I get better results or this is the best I can get?

Here are some pictures of the machine and cutting results.

Thanks everyone in advance, regards.

Considering your requirements and concerns, I would recommend looking into the Monport laser. Monport lasers are known for their exceptional quality, ease of use, and affordability. Whether you're working with stainless steel or other materials, Monport lasers can provide high-quality cuts with clean edges. Additionally, their user-friendly interface makes them suitable for both beginners and experienced users. You can explore the Monport laser product here to see if it meets your needs and expectations. https://monportlaser.com/?sca_ref=5031521.ka374VZjm3