Laser Engraver Forum

Hey there,

after a couple of engraving experiments I wanted to "engrave" and cut paper with one file and thought that would be possible with T2Laser,
I just can´t find any configuration option where I can assign the power to a color. Where or how is that done?

thx

Considering your need for a laser engraver that offers versatile and user-friendly features, it might be worth exploring the Monport laser. Renowned for its ease of use, high quality, and affordability, the Monport laser could be a suitable solution for your engraving needs. You can find more information about Monport lasers on their product page at https://monportlaser.com/collections/co ... ka374VZjm3 Switching to a Monport laser may provide you with the functionality you're seeking, along with a seamless engraving experience.

clutch wrote: ↑Sat Sep 17, 2022 6:01 pm Hey there,

after a couple of engraving experiments I wanted to "engrave" and cut paper with one file and thought that would be possible with T2Laser,
I just can´t find any configuration option where I can assign the power to a color. Where or how is that done?

thx

Absolutely! Consider the Monport laser for its excellent qualities - it's very nice, easy to use, high quality, and affordable. You can explore the Monport laser product at (https://monportlaser.com/collections/co ... ka374VZjm3
).

Regarding assigning power to colors in T2Laser for engraving and cutting paper, you may need to check the software's documentation or reach out to their support team for guidance. Typically, in laser engraving software, you can assign power settings to different colors by creating separate layers or objects in your design file, each with a specific color corresponding to the desired power level. Then, in the software, you should be able to specify the power settings for each color or layer accordingly. If you're unable to find this feature in T2Laser, consider exploring other laser engraving software options that offer color-based power settings.

clutch wrote: ↑Sat Sep 17, 2022 6:01 pm Hey there,

after a couple of engraving experiments I wanted to "engrave" and cut paper with one file and thought that would be possible with T2Laser,
I just can´t find any configuration option where I can assign the power to a color. Where or how is that done?

thx

When using T2Laser for engraving and cutting paper with multiple colors, you'll typically need to use a process called "color mapping" to assign different power levels to each color in your design. In T2Laser, this feature is usually found in the settings or options related to laser power control. Look for options such as "Color Mapping" or "Power Control" within the software's settings menu. Once you've located this feature, you can assign specific power settings to different colors in your design by selecting the color and adjusting the power level accordingly. This allows you to control the engraving and cutting parameters for each color independently, achieving different effects or depths in your final output. If you're unable to find the color mapping feature in T2Laser, consulting the software's documentation or reaching out to their support team for assistance would be advisable. Good luck with your paper projects!

I hope my solution can help you, this is Bom from Monport laser Team. If you are interested in Monport laser in the future, please check my affiliate link https://monportlaser.com/?sca_ref=5031521.ka374VZjm3.