My question is simple , I bought a water flow sensor at lightobject.
I want that if there is no water flowing so it will cut the laser !
Is there someone who could tell me how to connect it, please ?
Similar Threads:
Need Help!- Purified water vs. distilled water vs. deionized water
Request of water quality for water jet cutting machine
Is it possible to install a RPM sensor inside a 2.2kw Water Cooled Spindle
Water flow sensor
Moderator: baker
-
- Posts: 5
- Joined: Fri Oct 30, 2015 5:49 pm
- Contact:
Re: Water flow sensor
It is just a switch. When the water flows the contacts close, when no flow the contacts open. I bought a flow sensor some time ago from Light Objects and couldn't get it to work. I don't think the pump I had at the time had enough flow or pressure. I would test to see if it works before you install it in the unit. if you have a good pump be careful not to squeeze the lines in case the tubes break free and spray water everywhere. How to hook them up depends on the unit, but most units have a water sensor input.