Page 1 of 1
Autofocus level--20160219
Posted: Wed Feb 03, 2016 3:56 pm
by Stefan
how can i change the autofocos level ? Standard 4,5mm
and did someone have distance Information?
Standart Lens = 4,5mm
4” laser head = ?? mm
HR head = ?? mm
best regards
Stefan
Thunderlaser Mini 60
Re: Autofocus level
Posted: Thu Feb 04, 2016 12:45 am
by Thunder Laser -Nolan
Hi Stefan,
as you know, different laser head has different focus lenses,
if you still want to use the auto focus, you can change the setting on software.
the focus distance of standard head is 5~6.5mm,
HR head is 3~4mm,
4" head is 9~11mm.
http://www.thunderlaser.com/products/la ... ation.html
about how to change the setting on our RDWorksV8, please check the picture.
Re: Autofocus level
Posted: Mon Feb 15, 2016 3:31 pm
by Thunder laser - Tom
Hi Stefan
The focus distance of standard head is 6mm, but you set that user's setting is to 4.5-5mm is ok
Because of the auto focus has no need touching the material that will detect the material between 1mm
The HR laser head must be use manual adjust that focus distance, it is not support with use auto focus function
The 4'' laser head just be set to 9mm in the user's setting.