X/Y Axis Vibration

Discuss laser machine here freely.

Moderator: baker

Post Reply
CaldwellAZ
Posts: 1
Joined: Wed Jun 16, 2021 2:10 pm

X/Y Axis Vibration

Post by CaldwellAZ »

Hi, We have an 80w Red & Black Chinese laser. We've had a lot of alignment issues and now I've noticed it is vibrating quite a bit when moving. We've added a beam combiner to get a better alignment, but if you look at the video: https://youtu.be/wlypiBAaZ3g, you can see the beam jumps all over the place when moving (especially along the Y axis). This is resulting in weak and dashed cut lines.
I've checked the belt tensions - no change between tighter or looser. It does the same thing. Tracks and bearings seem OK.
Has anyone seen this before or have any idea what to check?
Thanks in advance!
Scott & Mary
Anoxine laser
Posts: 10
Joined: Mon Oct 18, 2021 3:02 am

Re: X/Y Axis Vibration

Post by Anoxine laser »

Your problem is that the light path is not calibrated properly. You can communicate with me about your equipment at any time. We are a professional laser equipment manufacturer


My email address is yubangying1985@163.com
Attachments
光路校准.pdf
(134.8 KiB) Downloaded 119 times
Post Reply