What's going on with my cut path?

Discuss laser machine here freely.

Moderator: baker

Post Reply
Natedawg9640
Posts: 1
Joined: Tue Jul 27, 2021 7:09 pm

What's going on with my cut path?

Post by Natedawg9640 »

Hi all!

Can someone diagnose what is happening here?

The cut is artifacted or power surging or something funky is going on.

I attached a pic. Any idea what i should look for to rectify these little notches/blowouts in the path?

the file has no nodules or anything along the path... that should be a smooth edge.

this is an 80w nova 35 btw.

thanks a TON for any tidbits of info. Lasers are new to me. :)
Post Reply