THUNDER LASER - cutting direction and adhesive

Discuss Laser Control Softwares here!

Moderator: baker

Post Reply
raiden25
Posts: 1
Joined: Mon Oct 21, 2019 10:19 am

THUNDER LASER - cutting direction and adhesive

Post by raiden25 »

Hello, I have a problem setting the cutting order in the program using the "edit cut property" option. I cut out elements that consist of many lines (they are cut so that they do not fall out of the form). After determining the order in which the item is to be cut, it cuts out approx. Unfortunately, if you press the button patch optimize / order of layer / and other similar, the whole layout changes. Even if I saved the file as I wanted, these settings simply do not save.

I just want to get the effect that the whole element cut into pieces is cut straight away, and the machine at the moment begins to cut one element, then the other begins, then returns to the first one, etc.

Is it possible to save these cutting order and cutting direction settings so that even if something changes in the settings, it can be restored?

I do not know if I have understood it clearly, if not I am asking for information :)
Attachments
rdworks problem 1.JPG
rdworks problem 1.JPG (178.94 KiB) Viewed 4904 times
rdwork problem 2.JPG
rdwork problem 2.JPG (52.57 KiB) Viewed 4904 times
Post Reply