MDF laser burn mark

We provide online after sales support here, very quick reply.

Moderators: baker, Thunder laser - Tom, Thunder Laser -Nolan

Forum rules
All members should make themselves familiar with the forum rules. Please ensure you read this section of the forum BEFORE posting.
This sub-forum is only for thunderlaser users ask for tech support from thunderlaser tech persons directly. The normal member should raise your questions in the General Discussion sub-forum. Before ask a new question, please read the "Previously Asked Questions"first to save your time.
Post Reply
User avatar
Ganeval
Posts: 1
Joined: Tue Oct 20, 2015 9:27 am

MDF laser burn mark

Post by Ganeval »

Hi,

Is it possible to reduce laser burn mark on top surface due to fumes ?
When i cut mdf there is always a brown - yellow mark at the beginning of the cutting.
I tried to adjust with laser power (min max) or laser through mode but i didn't see any effects.

Best regards
Richard
Ben
Posts: 137
Joined: Tue May 24, 2016 9:06 am

Re: MDF laser burn mark

Post by Ben »

If you cut the wood,I suggest you use the big air compressor to blow.
http://www.thunderlaser.com/features/hi ... essor.html
Post Reply