Hi all,
... got a used chinese 40W-CO2-laser in exchange for some reprap-parts - images attached ...
The laser was used only some hours, so could be good for some hundred hours more when handled carefully ... but one of the X-stepperdirver-halfbridges is dead, so I'll repair it - or even better, exchange the complete controller by an Arduino or a spare CNC-controller.
Is it usable for reprap? - with cutting a square in the bottom you can add a Z-axis in the working range for powder sintering or plasticwire-fusion setups ... or replace the CO2-laser by one of the cheap high-power diodelasers for other possibilities and much longer lifetimes ...
So you should check occasionally for really cheap old/outsourced CO2-engravers - their count at ebay (or forums) should rise dramatically, when the users, that originally imported them from China reached the lifetime (some ten to hundred hours) of the CO2-bulb and won't exchange it by importing a new one ...
refurbishing 40W-CO2-lasers
Moderator: baker
Puttana ragazza giovane video gratis
we had no problem.