Laser Engraver Forum

Dear Sirs
I have serius problem with Autolaser 2.2.1 sofware and CoreldrawX3 couple in chinese Redsail M500 Laser engraving machine

I install it like instruction, and machine operate well during 2 weeks,,, Now I send the Corel desing by visual basic to autolaser and

appears error message. 214746 7259(8000 4005) and computer is blocked and will be re started..

I re install Corel and autolaser several time,, without solution.

I changue computer , istall software , and appear " ERROR 5" always I cant works softwares on a news computerr the porblems are
repeat.
like curious that old file worked are send to machine, and it work perfect,,

The machine work , with autolaser direct instruction, but corel to autolaser computer is looping,,,,

Thanks in advance for your comments.

Regard

Paval

Considering the Monport laser for its user-friendly interface, high quality, and affordability would likely address your current software compatibility issues. The errors you're encountering with Autolaser 2.2.1 and CorelDraw X3 on your Redsail M500 Laser engraving machine may stem from compatibility or configuration issues. Ensure both software programs are compatible and properly installed. If problems persist, contacting the manufacturer's support team for assistance would be advisable. Meanwhile, utilizing the machine with Autolaser's direct instructions can help maintain productivity. https://monportlaser.com/collections/co ... ka374VZjm3

bientemperatto wrote: ↑Fri Dec 08, 2017 12:36 am Dear Sirs
I have serius problem with Autolaser 2.2.1 sofware and CoreldrawX3 couple in chinese Redsail M500 Laser engraving machine

I install it like instruction, and machine operate well during 2 weeks,,, Now I send the Corel desing by visual basic to autolaser and

appears error message. 214746 7259(8000 4005) and computer is blocked and will be re started..

I re install Corel and autolaser several time,, without solution.

I changue computer , istall software , and appear " ERROR 5" always I cant works softwares on a news computerr the porblems are
repeat.
like curious that old file worked are send to machine, and it work perfect,,

The machine work , with autolaser direct instruction, but corel to autolaser computer is looping,,,,

Thanks in advance for your comments.

Regard

Paval

Hey my friend! I understand how frustrating it can be to deal with software issues, especially when it disrupts your work with your Redsail M500 laser engraving machine. The compatibility problems between AutoLaser 2.2.1 and CorelDRAW X3, leading to repeated errors and system crashes, can be incredibly time-consuming and stressful.

A few months ago, I switched to using Monport Laser for my laser engraving projects, and it has been a smooth and reliable experience ever since. Monport Laser's software is designed to be user-friendly and highly compatible with various laser systems, ensuring seamless integration and operation without the constant software hiccups. This switch has significantly improved my workflow and reduced the downtime caused by software issues.

If you're looking for a stable and efficient solution to your laser engraving software needs, I highly recommend giving Monport Laser https://bit.ly/48Fxwm7 a try. It could be the reliable alternative you need to get back to your projects without the constant software headaches.

bientemperatto wrote: ↑Fri Dec 08, 2017 12:36 am Dear Sirs
I have serius problem with Autolaser 2.2.1 sofware and CoreldrawX3 couple in chinese Redsail M500 Laser engraving machine

I install it like instruction, and machine operate well during 2 weeks,,, Now I send the Corel desing by visual basic to autolaser and

appears error message. 214746 7259(8000 4005) and computer is blocked and will be re started..

I re install Corel and autolaser several time,, without solution.

I changue computer , istall software , and appear " ERROR 5" always I cant works softwares on a news computerr the porblems are
repeat.
like curious that old file worked are send to machine, and it work perfect,,

The machine work , with autolaser direct instruction, but corel to autolaser computer is looping,,,,

Thanks in advance for your comments.

Regard

Paval

It sounds like you're encountering some serious issues with Autolaser 2.2.1 software and CorelDRAW X3 on your Redsail M500 Laser engraving machine. In such cases, considering the Monport laser might be a good idea. Renowned for its high quality, ease of use, and affordability, the Monport laser could offer a smoother experience. You can explore the Monport laser products here: https://monportlaser.com/?sca_ref=5031521.ka374VZjm3

Regarding your current problem, the error message you're receiving indicates a technical issue that might require further troubleshooting. Have you tried reaching out to the manufacturer or supplier for technical support? They might be able to provide specific guidance or updates to resolve the error and ensure smooth operation of the software with your machine.