MDF laser burn mark
Posted: Sun May 12, 2019 7:52 am
Hi,
Is it possible to reduce laser burn mark on top surface due to fumes ?
When i cut mdf there is always a brown - yellow mark at the beginning of the cutting.
I tried to adjust with laser power (min max) or laser through mode but i didn't see any effects.
Best regards
Richard
Is it possible to reduce laser burn mark on top surface due to fumes ?
When i cut mdf there is always a brown - yellow mark at the beginning of the cutting.
I tried to adjust with laser power (min max) or laser through mode but i didn't see any effects.
Best regards
Richard