Laser Engraver Forum

Posted: **Wed Sep 11, 2019 3:15 am**

If your laser cutter’s LCD panel is in Chinese,it might cost you lots of time to set to English.Now Thunder laser will show you how to change Chinese to English just in a few seconds.

Step 1. click “Z/U” button

: 1.png (767.42 KiB) Viewed 4628 times

Step 2. select "语言设置"and then press “Enter” to confirm

: 2.png (803.74 KiB) Viewed 4628 times

Step 3. select "英文"and press “Enter” to confirm

: 3.png (970.95 KiB) Viewed 4628 times

Now it's in English

: 4.png (647.83 KiB) Viewed 4628 times

--I am not a technician,just a porter of knowledge.

Posted: **Wed May 06, 2020 10:11 am**

I believe that there must be a language reset button on the machine as these types of machines generally have that. I have read about this on grabmyessay which is why I can tell you that there will be a button on this machine. There should also be a multi-language booklet with the machine on which everything would be specified.

Laser Engraver Forum

If you buy a Chinese machine，How to modify the language of the machine control panel

If you buy a Chinese machine，How to modify the language of the machine control panel

Re: If you buy a Chinese machine，How to modify the language of the machine control panel