Laser marking machine product marking depth problem

[Reaying]

Some customers buy products laser marking machine, used for a year or two later, sometimes feel the target depth is too shallow, thought that was because of the machine.It’s not.Reaying state it for you for technical personnel to resolve laser marking marking depth processing method in machining operations.Basically has the following several reasons:

1. the partial optical path and use frequency doubling piece to adjust the light path, adjust to the best state.
2. the lens is dirty, use a swab touch alcohol, gently scrub YG rod end face, before anti after lens, lens, beam expander lens and focus lens
3. increase the laser marking machine laser power supply current, reduce the frequency of marking machine
4. to reduce the marking speed, change the way of filling.And artifacts are the focal point, to adjust the focus
More>>https://www.reaying.com/laser-marking-m ... h-problem/

[acctek12]

laser marking machine
https://www.acctekgroup.com/Laser-Marking-Machine/