R:
Hello. I am interested in Triumphlaser. But I do not know which to choose. 10w, 20w, 50w ... I need to engraved 1 mm maximum depth/deep on different materials (hard wood, glass, brass, hard plastic, steel, stainless steel, leather, ceramics ...).
The engraving area measuring 6 cm x 6 cm maximum. To engrave 1 mm deep, we must make several passes with the laser? I put an attachment examples of what I want to do. Which laser do you recommend? The laser 10w enough?
To convince me, you can engrave on the steel 1 mm deep,
Q:
1 , Metal engraving , you need fiber laser ;
https://www.youtube.com/watch?v=a2VCEshSZYU
Non metal like wood leather etc, you need co2 laser , fiber laser can not engrave non-metal .
https://www.youtube.com/watch?v=dufyiJ0A42w
2 , if anyone tell you that 20W can engrave 1mm deep on steel by once ,that's a lie Because we have 300W fiber laser , max cutting speed is 3mm Means for cutting 1 mm metal ,need about 100W fiber laser
3,But , 1 mm deep , after many times marking , it can engrave 1mm deep by 20W and 50W , 50W will be easy to make that deep .