Lines in engraving
Moderator: baker
-
- Posts: 22
- Joined: Sat Jul 08, 2017 1:38 am
Lines in engraving
Can anyone tell me how to get rid of these lines? I am now using Corel photo and RDworksv8. Resolution is 1500, frequency is 70 lines per inch,net graphic dithering. I've been struggling with image quality and would sincerely appreciate any and all helpful advice. Thank you!
Re: Lines in engraving
Interval must be equal to 25.4/DPI of your photocloseracing wrote:Can anyone tell me how to get rid of these lines? I am now using Corel photo and RDworksv8. Resolution is 1500, frequency is 70 lines per inch,net graphic dithering. I've been struggling with image quality and would sincerely appreciate any and all helpful advice. Thank you! FullSizeRender.jpgFullSizeRender (2).jpg
For example for a 300dpi photo must be 0.0847.
Also not use net graphic use dot dithering.
-
- Posts: 22
- Joined: Sat Jul 08, 2017 1:38 am
Re: Lines in engraving
Interval must be equal to 25.4/DPI of your photo
For example for a 300dpi photo must be 0.0847.
Also not use net graphic use dot dithering.[/quote]
Thank you very much, I did not know that about interval settings
For example for a 300dpi photo must be 0.0847.
Also not use net graphic use dot dithering.[/quote]
Thank you very much, I did not know that about interval settings
-
- Posts: 2
- Joined: Sat Jul 08, 2017 5:22 pm
Re: Lines in engraving
We are having the same issue with our laser -- Can't get rid of the lines... HELP!! Please!
-
- Posts: 22
- Joined: Sat Jul 08, 2017 1:38 am
Re: Lines in engraving
Blondie123 are you using RDworks? If so you might try changing your cut and sweep parameters to the settings in these photos. It seems to be working for me.
-
- Posts: 22
- Joined: Sat Jul 08, 2017 1:38 am
Re: Lines in engraving
Also do not use net graphic for dithering. Use an outside program like photograv if you have it or try dot graphic in RDworks. Net graphic is responsible for the lines, improper sweep parameters are likely the cause of poor quality
Re: Lines in engraving
Try to decrease the value of interval,general set from 0.06~0.08.
Re: Lines in engraving
This is my first day on the forum and I though I would hello. I bought a micro mill I am converting to CNC and was told this is the place to be. I look forward to bugging you guys with novice questions.
สมัครบาคาร่า
สมัครบาคาร่า
-
- Posts: 7
- Joined: Wed Sep 20, 2017 5:19 am
Lines in engraving
Hi everyone ,
Does anyone know how I can detect Double lines in an TS model?
I guess SelDup or SelDupAll is not the wright way for TSshapes...?
Greetings,
Michel
Does anyone know how I can detect Double lines in an TS model?
I guess SelDup or SelDupAll is not the wright way for TSshapes...?
Greetings,
Michel
I trust [url=https://tradingrobotsite.wordpress.com/2016/09/crashtrader.html]mt5 ea[/url] for successful business
Lines in engraving
Is there any way to remove the lines which correspond to margins, etc. from around text when in full page view?
My choice [url=https://tradingrobotsite.wordpress.com/2017/09/morgan-stanley-any-outcome-of-scottish-referendum.html]metatrader expert advisor[/url] for self-earnings